About this 3D model

This is a project I build for the first Maker Faire in Germany (in Hannover): The Raspberry Pi Glass (or wearable Raspberry Pi) Most of the project is printable with a 3D printer, I used gold colored PLA to get a retro futuristic look. In addition to the printable parts you will need: - A Raspberry Pi ;-) - SainSmart 1.8 ST7735R TFT LCD Module: http://bit.ly/sainsmartdisplay - The kernel module for this display: http://www.whence.com/rpi/ - 2 small plastic or glass lenses - Small Bluetooth keyboard: http://www.ebay.de/itm/111079678580 - Bluetooth dongle: http://www.ebay.de/itm/290762845726 - USB Powerbank: http://bit.ly/powergenusb - ~40 brass screws M3x20 (some has to be shortened) - 1 brass screw M3x30 - 2 brass screws M4x20 - ~50 brass nuts M3 - 4 brass nuts M4 - 2 self tapping screws (must fit through the holes of the Raspberry Pi) - Artificial or real leather - A cheap wristwatch - Acrylic glass (fluorescent for a nicer look) - 2 5mm UV LEDs and two matching resistors - A small switch You will also need some small parts like rivets, cables, USB plugs etc.