About this 3D model

NOTE the status is: Probably it works, but i currently dont feel like testing or developing it further. If you try it please provide feedback for others. (be specific) `clamp_` and `dry_` are more likely to work than `tiny_`. Maybe a tip if it doesnt work, destroy the connection mechanism and heat a metal wire through both parts(with correct axis), and twist those together. ## Clamps Clamps inspired on [thingiverse user KidCrazy](http://www.thingiverse.com/KidCrazy/designs)'s ['KCS' clamp](http://www.thingiverse.com/thing:89457). Untested. Intended improvements are: * Made it parametric. * Guides to center it. * Holes to glue some filament on in order to hold a regular spring instead of a plastic one. * (optional, parametric)Gap behind the teeth improves hold pn clothing. ## Potential improvements Many; * Springs are not properly parametric(actually left out the `dry_spring.stl` because it didnt work well) * Assembly could be easier. (That might mean just turning the guides off) * Parameters based on what the user want, and that dont require fiddling to get right. * When the distance between the prongs is small relative to the length the handles collide, increasing their distance would help. * More defaults. ## Potential improvements Many; * Springs are not properly parametric(actually left out the dry_spring.stl` because it didnt work well) * Assembly could be easier. (That might mean just turning the guides off) * Parameters based on what the user want, and that dont require fiddling to get right. * When the distance between the prongs is small relative to the length the handles collide, increasing their distance would help. * More defaults. ## Other As usual development versions [on github](https://github.com/o-jasper/various_physibles), also released [on fabfabbers](http://www.fabfabbers.com/models/id/140/dry-by-o-jasper).