About this 3D model

Designed as a stable high lift trainer wing for the Hobby Zone mini cub. Includes, left and right fuselage joiners and wing tips as well as the spar sections. There is a centre joiner piece included for a straight wing, which will need to be resized as required.. nominal recommendations are 17mm wide, unless you want to extend to use it as a single piece for the width of the fuselage (suitable for those with a brushless conversion only). Can be assembled with or without the 5 degree joiners, or use the 15 degree joiner for a poly wing (with angled wing tip sections). The stl file with the two wing tips contains a shortened version of these parts.. seems to work fine, saves - 5 - 6 grams. Notes post first flight.. is a very high lift wing, requires additional weights to ensure a nose down balance point. The Version 8 files are a less agressive lift profile, is matched to the Version 5 centre spar for the centre join, wing tips and angled joiners included.