About this 3D model

This is a female fitting for attaching to a threaded garden hose. The thread is an attempt at the 3/4" GHT. Thanks to http://www.thingiverse.com/billybob for the thread profile information. http://www.thingiverse.com/bluemetal took the plunge and reported that the threads do work. There is provision for a rubber washer (up to 2.5mm thick) to create the seal. Explanation for each of the files is given below. In itself, this is fairly useless. I created it so that it can be merged with other objects. Maybe make a plant sprayer. My ultimate goal would be to create a printable lawn sprinkler, as http://www.thingiverse.com/supermange proposed in http://www.thingiverse.com/thing:10127. These were created in SolidEdge, so I can upload native or other file formats per requests. If there is a particular adaptation that you would like to see, let me know and I'll see what I can do.Solid: This is a basic cap. It was created to allow for the testing of the seal under pressure. It also can be modified to have any desired outlet.Status:v2 Untested (7/20/11)v3 Untested (7/21/11) New thread profile10mm: This fitting has a 10mm outlet, with a 5mm chamfer at the upstream end.Status:v2 Untested (7/20/11)v3 Untested (7/21/11) New thread profile.5 PVC: This fitting has a hole for 1/2 inch PVC pipe, slightly tapered so the pipe should bottom out.Status:v2 Untested (7/20/11)v3 Untested (7/21/11) New thread profile