About this 3D model

Bowden adapter exclusive for the BCN3D+ printer with the BCNozzle 0,4 and 3mm diameter filament. Complete BOM: * 1x PLA ST (0.2 layer) printed Bowden support. * 2x ABS HQ (0.1 layer) printed Bowden coupling. Note that there's a 1/8" threat inside. * 2x Pneufit straight adaptor,1/8inx6mm @ [http://reprapworld.com/](http://reprapworld.com/?products_details&products_id=168&cPath=1616_1653). * 0,7 meter of PTFE tubing, 3.18inner/6outer diameter @ [http://reprapworld.com/](http://reprapworld.com/?products_details&products_id=166&cPath=1616_1653). * Required fasteners (6x DIN912 M3x12, 4x DIN912 M5x16, 6x DIN934 M3 nuts, 4x DIN125 M5). UPDATE 1: after several tests, the best results were achieved with Cura. You will find the config files attached, for both PLA and ABS. See instructions for more info. UPDATE 2: New carriage design thanks to the great work of DaniSaez Remixed by me (http://www.thingiverse.com/thing:428226) UPDATE 3: As ronald_kubo pointed at comments, this version is valid only for everybody who has a BCN3D+ starting with serial number 00.xxx (bought before November 2014). For those who has a BCN3D+ starting with serial number 01.xxx (bought after November 2014) use [this remix](http://www.thingiverse.com/thing:1302144).