About this 3D model

**DDW96, original duplicator of the LV-30T Rocket Engine used in the KSPMBB set, has requested that I remove my tag from his model. Instead of downloading the Starter or Basic sets, please download all parts separately and use the "NoInitials" version of the rocket engine.** This idea's been on my mind for a while now. First of all, my thanks go out to "lilykil" and "DDW96" for the models themselves-- all I did was poke a few holes in them. This is a set of printable KSP parts with tiny holes for inserting 1/4 x 1/16" magnets (these, specifically: https://www.amazon.com/dp/B00ILWZQTO/ref=cm_sw_r_cp_apa_FLSVBbJSAKBEY). Print the parts, glue the magnets in place, and get your Jeb on! *Jebediah Kerman does not endorse KSPMBB's* Included in the Starter Set: 1x Mk1 Lander Can 1x FL-T400 Fuel Tank 1x LV-T30 Rocket Engine **(Please download the "NoInitials" version)** 1x Mk1 Parachute 1x Stack Decoupler 2x Radial Decoupler 2x RT-10 Solid Fuel Booster 4x LT-2 Landing Strut **Changelog** **v1.01: Fixed radial decouplers, made landing legs more robust.** **v1.02: scaled up slightly because the hole diameters were too tight.** **v1.04: Scaled up further for more forgiving tolerances, made radial decouplers more robust. Added a simple tolerance test with three holes: center is with no adjustment, left is -5% scale, right is +5% scale.**