About this 3D model
ATTENTION: NEW MODULAR POOP CHUTE V2 MODEL IS LIVE. CLICK HERE TO EXPLORE This is a Magnetic Modular Poop Chute for waste baskets positioned under or on the side of the printer. You can easily adjust the length/direction of the tunnel by adding/removing tubes of different lengths and angles. To prevent failed prints, I recommend reading the description below. All parts are modeled with tolerance taken into account, but please pay attention to the different support types required for the magnetic frame and other components. Magnetic Modular Poop Chute Tunnel for Bambu Lab printers. This 3D print model offers an adjustable-length and angle. Designed for easy assembly with magnetic connection, this model allows quick customization of desired length and angle. The adjustable features cater to various printer setups, ensuring compatibility with X1C/P1P/P1S Bambu Lab models. Compact and sleek, the tunnel seamlessly integrates with the printer's aesthetics while providing a discreet and efficient waste disposal solution. Boost Me Boosts are highly appreciated. It means you’re interested in this model, and I will continue working to improve it. PRINT INSTRUCTIONS: Filament: Works fine with PLA, PETG, ASA Support for Magnetic frame: please print the part with normal supports facing the magnet slots up Support for other parts: for the angular connections please use slim trees supports Layer hight: 0.2mm Brim: i recommend using outer brim for the tubes and connection parts Magnets: 12 pcs of various sizes (ensure to check for the correct magnetic plate option) At the moment, this build is not compatible if you're using a back spool. I will add a solution in the near future UPDATES: 26.02.2026 New Modular Poop Chute V2 model added 10.05.2025 added magnetic frame for H2D printers with support for various magnet sizes (6x2, 6x3, 8x2, 8x3, 10x2, 10x3). Special thanks to @TheProgrammer for making the test prints. Please note that this part is still experimental and if you encounter any issues, feel free to contact me 11.01.2025 added separate print profiles for each part of the model 04.01.2025 updated print profile with all parts fixed (again) the issue when parts not holding tight together for some users added new Magnetic Frame V2 for 12 magnets 10x2mm, 10x3mm, 8x2mm, 8x3mm (removed the lip that caused clogging inside the poop chute) 19.09.2024 updated print profile with all parts fixed the issue when parts not holding tight together for some users added Magnetic Frame for 12 magnets 8x1.5mm added end parts 45° and 35° added short 4cm tube 22.06.2024 added Magnetic Frame for 12 magnets 10x3mm 14.02.2024 added short version of Top part (with and without monitoring hole) 08.02.2024 added Magnetic Frame for 12 magnets 8x3mm added Magnetic Frame for 12 magnets 6x3mm added Magnetic Frame for 12 magnets 8x3mm (to fit under the old AMS hub) added Main Tube without the monitoring hole