About this 3D model

Hello, this is my self-built RC forklift. It's 1/14 scale. The forks can be raised to a height of approximately 290 mm. The mast can be tilted via a geared motor and threaded rod. The steering can turn almost 90°. I've created building instructions for it. But please forgive me, it's my first time. Feel free to ask if you have any questions. If you have to buy everything, you should expect to spend around €100. Parts List: Magnets: 6x 4x3mm Ball bearings 3x8x3: 14 Ball bearings 2x5x2.5: 14 Ball bearings 8x12x3,5: 1 Screws M2x3: 8 Screws M2x12: 12 Screws M2x8: 10 Screws M2x18: 2 Screws M3x6: 1 Screws M3x8 countersunk: 20 Ground screws M2x5: 2 Ground screws M2x10: 6 Ground screws M3x5: 6 M2 Nut: 4 M4 Nut: 1 N20 Gear Motor 65rpm 6V 1024G-N20 Flip-Typ M4 100rpm JGA 25 Gear Motor 100rpm Rope / Ribbon 3mm Wide 3x Brushed ESCs Min. 4 Channel Receiver 1x 9g Servo 2s 7.4V LiPo Battery approx. 300mAh Differential WPL C14 C24 etc. Wheel Weights / Balancing Weights PETG and TPU Filament Optional Colors: RAL 1007 and RAL 7042 Forum Thread: https://modelltruckforum.com/forum/index.php?thread/64298-gelber-gabelstapler-aus-dem-3d-drucker/ Added 25.01.2026 Gabeltraeger V2: The rope length can now be adjusted. Exterior parts: front headlight guard and side ventilation grilles Wider rear tire Rear knuckle V2 to accommodate the wider tire Front tire with less tread Added 06.02.2026 Rims to mount Lego Tires 49,5x20 in the front. Rims to mount Fischertechnik 35x15 tires in the back. Added 08.02.2026 Forks of different lengths Added 02.03.2026 Differential Update Container for the counterweight Cabin Update (Roof grille, door, windows, fake headlights) Added 28.03.2026 Servo Steering Gear for less toe-in or toe-out Added 01.04.2026 Steering with less play