About this 3D model

A shifter mount for mounting Logitech shifters onto the Playseat Challenge racing rig. Logitech-playseat01 is the shifter mount for mounting on the right side Logitech-playseat02 is the clamp for mounting on the right side and Logitech-playseat03 is the shifter mount for mounting on the left side Logitech-playseat04 is the clamp for mounting on the left side and It clamps onto the tube on the right or left side of the seat using five M4x20 mm or up to 30 mm length screws and and the shifter is secured to the mount with two M6x16 mm or similar length screws. Do not overtighten the M4 screws or the plastic will strip. Also check out my other sim racing stuff: https://cults3d.com/en/3d-model/various/thrustmaster-t500rs-steering-wheel-adapters-70-mm-and-74-mm https://cults3d.com/en/3d-model/gadget/playseat-challenge-thrustmaster-th8-shifter-mount https://cults3d.com/en/3d-model/various/playseat-challenge-steering-wheel-bar-play-remover https://cults3d.com/en/3d-model/gadget/playseat-challenge-headset-vr-hanger Screw assortment for this and other projects. It helps me out a lot if you using one of my affiliate links like this: https://www.banggood.com/300Pcs-M4-M5-M6-Stainless-Steel-Hex-Socket-Cap-Head-Bolts-Screws-Assortment-p-1218506.html?p=HD240528697332015103