About this 3D model

This is a bearing. It was mainly designed for model cars. This model was created in PLA. It was printed using Cura 15.04 with a 0.2 layer height. The balls can be a little trikcy, but if you reduce the printing speed it should be no problem. You have to put the inner cylinder (innerb.stl) and the outer cylinder (outerb.stl) together and put the balls in, then stick the rings to the cylinders (innerl.stl ot innerb.stl and outerb.stl to outerl.stl). It was originally created for the ForceFiber competition. Printed using Fiber Force filament.