About this 3D model

I bought a cheap Samsung monitor that didn't had a feet, so I designed this simple, ergonomic but strong stand that took minimal space on my desk. The stand is made of a couple different parts that allow it to have 7 different height settings and also the design allows for angle adjustment. The lower part is fixed to the table with 4 or 6 screws (4 screws is enough) directly to the table, then a squared printed pieces locks the lower and upper part at the designed height). The upper part has a “cog” design which allows you to effectively lock it at the desired angle. Then use a screw and nut or a heated insert to lock it in place. Due to this design, it allows to use it even with heavy monitors (compared to just friction angle adjustment). The adapter of the monitor is universal VESA 75. If you have need for a VESA 100 this can be easily changed, but if you can't change it let me know and I'll happily design it. For the height adjustment lock you can either just print the lock and use it normally, or if you want to print the 2 nuts on the sides to make sure it stays locked in place, you can also do, but it's not critical. If you have any functional question let me know.