About this 3D model

(26-Apr-2026) UPDATE: V1.6 was released! Added larger Main Base for folks with larger monitors. Although I still cannot guarantee compatibility with anything over 17" - this updated profile should make your life easier. See updated Base in Print Profiles! Thanks! (27-Sep-2024) UPDATE: V1.5 was released! Main Base was slightly trimmed in the front to reduce protrusion, small counter-balancer on the back was adjusted. Pattern hole on the back was changed to support adjustment. Vertical post was redisigned to support adjustment! Now you can change your height to a suitable position! As always, please let me know your thoughts! All feedback is welcome and greately appreciated! YOU ARE THE BEST! UPDATE: Please let me know if you want features to be added or if something doesn't quite work for you. I want to make it a better adapter, but it requires further testing with various monitors, which I don't have. Any feedback is greatly appreciated! Boost Me Please support my work and always leave the feedback you can! It is the best way to improve any work and design. You are the best! Thank you. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This is my take on a lightweight and slim solution for a small monitor stand. I needed to develop a stand for a 15.6" monitor. Here it is. It is best to use with 15.6" or smaller monitors but can be used with 17" as well. Just make sure that your monitor has enough clearance and is not super thick since it may tip over. Again, the stand is very minimalistic and thin; it is designed mainly for small and portable monitors, like the one in the picture. If you are not sure if your monitor will work - let me know and I may be able to help you with that. VESA 75x75 is the requirement for the mounting. For assembly - any socket head M4x10-15 with 0.5 thread pitch would work, i.e. 18-8 from McMaster-Carr .