About this 3D model

Kryptonite U-Lock Dust Cover / Kryptonite U-Lock Cover German The cover is for the Kryptonite U-lock New York M18-WL. This cover replaces the original cover. Under certain circumstances, the cover may also fit other Kryptonite locks, but I cannot test this unfortunately. I have replaced the original screws with two M3x16mm screws. Print recommendations: The cover should be printed from a flexible filament such as TPU. Non-flexible filaments such as PLA and ABS are too brittle and break very quickly during use. The slider can be printed with any type of filament, I used PLA for this. ================================================================= English The cover is for the Kryptonite U-lock New York M18-WL. This cover replaces the original cover. Under certain circumstances, the cover may also fit other Kryptonite locks, but I cannot test this unfortunately. I have replaced the original screws with two M3x16mm screws. Print recommendations: The cover should be printed from a flexible filament such as TPU. Non-flexible filaments such as PLA and ABS are too brittle and break very quickly during use. The slider can be printed with any type of filament, I used PLA for this. Print Settings Printer Brand: Anet Printer: A6 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 100% Filament: OVERTURE TPU Black Category: Replacement Parts