About this 3D model

English: This small enclosure houses a Bluetooth remote control ( Festool CT-FI ) for Festool vacuum cleaners and allows mounting them on the wall, which are actually designed for mounting on a suction hose. The enclosure has two holes for 3mm up to 4.5mm countersunk screws. The lid fits tightly to the base without any additional screws and can be opened on the sides with the help of a screwdriver. Both buttons of the remote control are freely accessible. The print files are laid out in such a way that they can be printed very easily lying down. Only the lid has an overhang, which requires a support. I also recommend printing the parts with 100% infill. I've tested printing with both 0.4mm and 0.6mm nozzle without any problem. German: This small enclosure houses a Bluetooth remote control ( Festool CT-FI ) for Festool vacuum cleaners and allows mounting them on the wall, which are actually designed for mounting on a suction hose. The enclosure has two holes for 3mm up to 4.5mm countersunk screws. The lid fits tightly to the base without any additional screws and can be opened on the sides with the help of a screwdriver. Both buttons of the remote control are freely accessible. The print files are laid out in such a way that they can be printed very easily lying down. Only the lid has an overhang, which requires a support. I also recommend printing the parts with 100% infill. I've tested printing with both 0.4mm and 0.6mm nozzle without any problem. * = Amazon Affiliate Links