About this 3D model

I have been designing a series of different railway lineside buildings. This is a building that I had seen at Yeovil Junction many times and thought I might model at some point. Buildings like this I haven’t really seen modeled for model railways, and it was an interesting building to model. This model has been designed to be printed on an FDM printer and is approximately 170mm long, 42mm wide, and 45mm tall. This item was designed using an OO gauge, a 1/76.2 scale.For HO Gauge print at 87%, 1/87 Scale,For O Gauge UK print at 175%, 1/43.5 scale,For O Gauge International print at 158%, 1/48 scale,For TT Gauge print at 63.5%, 1/120 scale,For N Gauge UK print at 51.5%, 1/148 Scale, (Caution: I have not test printed this in N gauge scale). This item has been designed to be printed on an FDM Printer This item has been tested on a Bambu Labs A1 filament printer with a layer height of 0.12mm and a 0.4mm nozzle. As normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the model's look too much. If you like my designs then please would you support me through my Patreon account - https://www.patreon.com/PJD1974, any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support and for £4 you will get insight into my new designs and be able to contribute to my future projects. Please check my Website, **https://sites.google.com/view/pete3dprintinghelp/home** My website has lots of useful info. If you like my content and would like to buy me a coffee to say Thank You, then please click this link https://ko-fi.com/petes3ddesigns