About this 3D model

2022-10-23 Update : Added mount for horizontal adjustment: 15 and 25 degrees. Hint: If the included file is not pointing to the side you want, use the “mirror” feature in your slicer to mirror the model. I mounted my UniFi Protect G3 Instant camera on the wall, then I noticed that I'd like to have it point towards the floor by a few degrees more than what was possible with the provided wall mount. Instead of spending 5 minutes downloading and printing another mount, I spent an hour designing an adapter that goes in between the default wall mount and the camera. It requires no drilling or otherwise adjustments. I assume the design also works with other UniFi cameras that have the same mount like the G4 instant, but I haven't had the chance to try it out - if you do, please leave a comment saying if it works or not. I've included 15 and 25 degree versions, it can easily be remixed to add further variations, as the middle is just a cylinder. The proper print orientation is: The red areas are for support only, just break them away after printing if they're in the way. I've added them so that you don't have to bother with adding additional supports.