About this 3D model

Mounting the external spool on the side for easier access, with added filament guide for smooth operation. Parts 2 x 608ZZ bearings 1 x PC4-M10 Pneumatic Connector (optional, included filament arm for PTFE tubing for those without) 1 x m3 x 14mm or 16mm for the top screw hole (start with the smaller one first as can bottom out and get stuck easily). 2 x m3 x 18mm for the bottom screw holes. Connector: https://www.amazon.co.uk/gp/product/B0966XQ4C4/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Choose either the 3mf file with the PC4-M10 fitting, or the one with PTFE passthrough. Included 3mf file setup as follows: 0.20 layer height @ 50% infil, I recommend PLA+ 4 walls 4 top and bottom layers Supports Spool on 2nd build plate as I think the model looks better in 2 colours :) Both filament arms included on build plate, remove the one you dont want. Assembly Spend a few minutes carefully removing the supports from the inner slots Screw on the pneumatic connector to the filament guide and inert some bowden tubing. The PC4-M10s allow the tubing to pass through. Screw to side of case using the top back case screw hole and the 2 original screw holes. Slide on spool holder. Slide on filament arm. Detatch when not in use or leave as is. Boost Me Like share and boost if you enjoy :)