About this 3D model

This is a remix of the Prusa Mk3 version. I use this system on my Prusa and I have not found an equivalent for the Genius, so I made an adaptation ^^ These are 24V LEDs, connected directly to the power supply on the free pins. I only use them to check my current prints, the LEDs are not on for several hours. I created a notch on the files in order to lower the cable to the right or to the left towards the power supply. I added a switch at the bottom of the right arm (super easy access). To fix the led support, you will need 2 M5x12 screws (Originally, they are 8mm long, they are too short, you will need 12mm minimum, if it is longer, it is not a problem) I have not checked yet, but I think we can use the full height of the print. Prints without support! Files: Prusa MK3 model: https://www.prusaprinters.org/fr/prints/3267-led-light-bar-prusa-i3-mk2mk3 Switch housing: https://www.prusaprinters.org/fr/prints/18478-artillery-sidewinder-x1-led-top-extrusion/files U-Profil en U (258 mm for the Genius, join here): https://www.prusaprinters.org/fr/prints/54526-led-u-channel-9x17mm Cable entry profile: https://www.prusaprinters.org/fr/prints/30734-20202040-extrusion-cover-cable-channel Purchase: Led 24v: https://www.amazon.fr/gp/product/B07L5QRPVZ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1 switch: https://www.amazon.fr/gp/product/B076GXD7XN/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1 → if you have any questions, do not hesitate