About this 3D model

Wheelset Cradles are commonly found around engine sheds and maintenance depots. This model has four versions for different wheel diameters (14.1mm, 16.6mm, 11.5mm, and 10.5mm). I recommend printing these items on a 3D resin printer to get the best resolution print. As per normal with my designs, there is a balance between accuracy and printability, hopefully not affecting the model's design too much. These items have been designed at 1/76 scale but can be printed at other scales.Primarily, these items have been designed to be printed on an FDM printer, but can also be printed on a Resin Printer.designed at OO gauge, 1/76.2 scale.for HO gauge print at 87%, 1/87 Scale,for TT120 gauge print at 63.5% 1/120 Scale,for O gauge UK at 175%, 1/43.5 Scale,for O gauge International print at 158%, 1/48 Scale,for N gauge print at 51.49%, 1/148 Scale, (Caution: I have not printed this model in N gauge so can’t guarantee its printability) The main resins I use for printing can be found with my affiliated links below.I use AnyCubic Water Washable Resin for most of my items, but use AnyCubic ABS-like Resin for anything that needs to be stronger and tougher. AnyCubic ABS-like Resin https://amzn.to/3yRjgu4 (Amazon)AnyCubic Water Washable Resin https://amzn.to/3T3MgFY (Amazon) If you like my designs, then please would you support me through my Patreon account - https://www.patreon.com/PJD1974. Any money raised helps me research, design, and develop new items for me to share. For £1 a month, you will give me basic support, and for £4 you will get insight into my new designs and be able to contribute to my future projects. Please check my Website, https://sites.google.com/view/pete3dprintinghelp/home My website has lots of useful info. If you like my content and would like to buy me a coffee to say Thank You, then please click this link https://ko-fi.com/petes3ddesigns