About this 3D model

4L filament drybox Background The idea was to create a drybox with as few modifications to the food container as needed where the spool can be changed with ease. Idea and Inspiration This is a collection of things I've found to work well together and adopted them for a nice all-in-one set. The base was inspired by mars gizmos design: https://www.myminifactory.com/de/object/3d-print-marsgizmo-filament-bunker-131183 The spacer is a remix of this wedge: https://www.thingiverse.com/thing:4647864 The outlet screws used: https://www.thingiverse.com/thing:4667797 Parts to print What you need: Print the Filament Base first (without supports) - scale the model down to 10% Print 2 Roller Print one Silica Lid and check if it snaps to the base Depending on the filament you may need to resize it in small (0,5 - 1,5%) steps Optional but recommended: Print the screws linked above Depending on the filament I would recommend to scale the nut up a bit so the thread goes easy. For bigger spools I'd recommend the original wedge above as it will push the sides better to fit bigger spools. ### Additional parts needed 1 Drybox 4 608 ZZ Bearings 1 Compression Fitting (optional) Part list on Amazøn w. affiliate links: Dryboxes: amazon.de/gp/product/B08JTH2NZJ/ref=as_li_tl?ie=UTF8&tag=swooshy-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B08JTH2NZJ&linkId=29819cd04faf9df305e633c6a2204828 Bearings: amazon.de/gp/product/B08K936Y1Z/ref=as_li_tl?ie=UTF8&tag=swooshy-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B08K936Y1Z&linkId=5b89cee1cd0a113c97c02624f293fdc1 Compression-Fittings: amazon.de/gp/product/B07P3BC4GQ/ref=as_li_tl?ie=UTF8&tag=swooshy-21&camp=1638&creative=6742&linkCode=as2&creativeASIN=B07P3BC4GQ&linkId=2daef8abc206fda31e794708d1e09812 Assembly Insert 2 Bearings into each roller Mount both roller to the base Fill the silica box in the base (approx 40g until full - way more than enough for 4L) Add the lid and set the whole base into the container Insert the hydrometer into the spacer-wedge Install in front of the box where the grip is Optional: Drill 10mm hole where you want to guide your filament outside Install the printed screw Screw in the compression fitting You might also hotglue a small (6x3) magnet from the inside of the lid to attach a filament swatch from the outside :) Print Settings Rafts: No Supports: No Resolution: 0.2 Filament: 3DJake PETG black Category: 3D Printer Accessories