About this 3D model

Bambu Lab P1 / X1 Series Filter Cover (4/25/2023) Designed alternative filter covers for Bambu Lab printers. Latest Update 11/22/2023 Added additional size for the X1 filter covers that decreases or increase the distance from the hygrometer to the filer Base x1 file has 6.5mm of clearance The 5.5 mm version will add more clearance from the build plate but it will lessen the clearance to the filter The 7 mm version will add more clearance from the filter but it'll lessen the clearance to the build plate 5/22/2023 Added filter cover that works with the hygrometer and the x1/x1c. New model now clears the filter in the x1/x1c. Big thanks to @mars3142_732125 for the recommendation , testing, and validation. Files Main Files Filter_Cover_Flush Filter_Cover_Hygrometer Filter_Cover_Hygrometer_x1 Alternative Files Filter Cover with Hygrometer X1 5.5 mm Filter Cover with Hygrometer X1 7 mm Print File Filter Cover Print File Additional Parts (If using a Hygrometer) Hygrometer - https://www.amazon.com/dp/B07GNMKYCZ?psc=1&ref=ppx_yo2ov_dt_b_product_details Most of the Amazon ones are the same, as long as the dimensions are 1.89" x 1.13" / 48mm x 28.6mm Print Orientation Print Settings DO NOT USE PLA, IT WILL BREAK. Please use PETG, ASA, PLA+ , etc. I used Polylite Pro PLA+ Set your K calibration and adjust setting based on your filament Quality Please see build plate file. Support Please see build plate file. Assembly Insert left side first. Give the right side a little bend so it'll snap in easier. Snap in the center top and bottom. To remove, use a small flathead in the area circled below. If you like my designs and want to say thanks, you can buy me a coffee and help fund the filaments I need for prototyping. A donation of any amount to Buy Me a Coffee or PayPal would be greatly appreciated! As always, given different printing environments, filaments, etc., prints may not work perfectly for everyone. If you are having issues please message or comment and I will try my best to resolve the issue.