About this 3D model

This is a Triangular Filament Waste Bucket-Poop Bucket with an In-bedded Bambu Labs Logo(blank and editable text versions are also available, to create what you like!). It can be attached to the back of the X1C or any other metal surface using small round neodymium magnets. The Bambu Lab Logo is only 2 layers depth (0.4mm), allowing for minimal filament usage and minimal filament changes. PLEASE NOTE: AMS Required (2 Different Filaments Used) Optional Parts Required 6off - 6mm x 3mm Round Neodymium Magnets - allows the bucket to attach to the metal backplate of the printer or maybe even on a fridge door etc.(its has multiple uses). Printing Times 4h 51m – PLA Silk Filament Profile OR 3h 29m – Normal PLA Filament Profile Filaments Used Ziro PLA Silk Silver - the main object body. Bambu Lab PLA Green - the logo (I used what I had left over from the filaments that came with my X1C). Print Settings Quality Tab Layer Height = 0.2mm Wall Generator = Arachne Strength Tab Wall loops = 4 Sparse Infill Density = 25% Sparse Infill Pattern= Grid Support Tab Enable Support = YES(TICKED) Type = Tree(Auto) Style = Tree Hybrid On Build Plate Only = YES(TICKED) Remove Small Overhangs = YES(TICKED) Others Tab Skirt Loops = 1 Brim Type = No Brim Prime Tower Enabled = YES(TICKED)