About this 3D model

I created a filament spool holder primarily for the P1P. Easy to print in about 40 minutes. I had some bearings lying around, so I used those cheap 608 zz bearings from Amazon . You could also print the provided “bearings” yourself, but the metal ones will be smoother. I'm using the first version without any screws, so if there's a problem, just let me know. 21.01.23 : Thickened the mounting plate to counteract the flex for heavy 1 kg spools 20.01.23 : Re-uploaded the files with 2 and 3 screw holes, should fit perfectly on the back panel now There are 3 versions: Without any screw mounts. You can take any double-sided tape (I used this one , it's quite sticky) and put it on the bottom of the printed body. Attachable basically anywhere, even on the original spool holder. With 2 screw mounts. Attachable to the original mounting points on the P1P. With 3 screw mounts. Attachable to the original mounting points on the P1P. Its main use is to screw it somewhere at your workbench. I mounted it inside my printing closet. Used parts: 12g PETG in Black 2 x 608 zz bearings Printed without supports and the 0.2 mm standard preset in Bambu Studio. Infill 15%. I tried variable layer height, so the surfaces look way more detailed without any additional printing time added. Have fun printing :D The links are from the Amazon Affiliate program.