About this 3D model
New Universal Spool v2 released! Click here ! Universal spool for using filament on cardboard spools or Refill Packs (like eSun Refill Filament) in the Bambu AMS. No rewinding necessary, simply transfer the cardboard or refill core to the universal spools. Suitable for core diameters (inside) from 75 to 100mm. With Jayo spools, it is a little tricky to remove the rather thick ring at the core. You need a sharp cutter and patience. Check out my new video with a steb by step tutorial. Measure the width of the cardboard spool (inside between the reels). Carefully remove one side of the cardboard spool. Screw the corresponding core (50, 55 or 60mm width) onto a reel and insert it into the cardboard core. Then turn over and remove 2nd side of cardboard reel. If desired, then insert Silicatube (with silica gel or ballast). Then screw on second roll, done. Now the filament can be used in the AMS without any problems. I made 2 designs of the reels, design nr. 2 needs less printing time. I use PLA (it is flexible enough for the core) with these settings: 3 walls 3 top and bottom layer 12% Gyroid Infill 0,16mm layerhigh (with variable layerhigh for the reels if you want) 22.11.2023 added the new v2 Cores (as Print Profile) The number of spiral arms was reduced from 4 to 3, while the diameter was increased from 110 to 117 mm. This means that the spools sit even better and less material is used, which also reduces the printing time slightly. The v2 Core with 60mm was tested by me with various filament and is therefore compatible with the following cardboard spools: Creality eSun GratKit Kexcelled Overture Sunlu Not yet tested, but should fit: Eryone Bambu Lab Refill 17.10.2023 new rewind core . With this new core it is now possible to rewind filament with my universal spool, e.g. from a cardboard spool or a 3kg spool. 02.10.2023 added a "Core Jayo 85-55" especially for Jayo Spools. It's slightly smaller than the normal 100-55 Core. reworked the silica-top, the thread now runs more easily. updated the 3mf-File