About this 3D model

This is a simple pumpkin planter pot that I designed to be as fast and easy to print as possible. The design includes a series of drainage holes to keep your plants happy and healthy. Dimensions: By default, the planter is 3 inches in height and has a 3 inch opening. Scaling up shouldn't cause any issues, although scaling down too much may leave the walls too thin. Printing: This should be a VERY easy print. The walls of the planter are exactly 1.6mm thick, so four passes with a 0.4mm nozzle will get the job done without needing infill. I also used variable layer height, which I highly recommend. I printed with Overture Orange PLA, and was quite happy with the color.