About this 3D model

Options Pick the Coffin you want to use. Coffin No LED - Has a hollow back to allow some ambient light to pass through it. Coffin LED Strip - Supports strips up to 10mm wide, you might be able to squeeze a 12mm strip in. I didn't add any holes to the back for wires or switches since we all do things our own way, so either manually cut it, or use a negative modifier in PrusaSlic3r. These are the backgrounds for the pumpkin. Pumpkin BG 1 - Use this If you want to print a black or dark colored pumpkin. Pumpkin BG 2 - Use this if you want to print an orange or light colored pumpkin Print 1 of everything else. Print Recommendations I highly recommend using Ironing for all of the inserts, and I print towards the hotter end of the filaments specs. For PrusaSlic3r I use: Ironing Type: All Top Surfaces Flow Rate: 30% Space Between Passes: 0.2mm Ironing Speed: 100mm/s Assembly Layer Order is the following Moon Sky House Tree Owl Tombstone Pumpkin BG Pumpkin Coffin Cap