About this 3D model

E-Ring is used to fix the Stud Unit into the Bed rack. For Sindoh 3DWOX DP200/201, when the printer is idle, its Bed is set to move to the default position at which location is to be the lowest position. The Stud Unit works as a fixture for the Bed not to move when the printer is idle and the bed is at the default position. Stud Unit does not affect the precision of the print or any other performance of the printer since the Bed is set to move to its standby position as the printer starts to get ready regardless where the bed was located before. Time to time, the Stud Unit fell off from the Bed rack as its E-Ring gets dislocated from the Stud due to various shocks to the printer box during shipping. In result, some of you discover the Stud Unit rolling around on the bottom plate of the printer. When this happens to you and if you can't find the E-RIng, use this E-Ring design to print out DIY. Please ask us via Contact Us menu at our website.