About this 3D model

Here is a collection of lithophanes I made using the Itslitho maker. These feature popular saints. They were designed to fit most common nightlight but these are the ones that I used . If you would like one with just an on and off switch I also used these . I printed these in Sunlu White PLA and Sunlu White PETG and they both work extremely well. To make these color litho you need to print out the image at a 1:1 scale and glue it to the back of the lithophane after you print it. I use a clear UV cure resin found, here . I just brushed on the resin to the back of the diffuser then placed the printed image on it. I then brushed on another layer of the resin to saturate and cover the paper. After that I aline the paper into the proper position by looking at it with a light behind it. Once satisfied you can leave it in the sun to cure or use a black light. Final part is to remove the diffuser that comes with the nightlight and slide your new diffuser on. I hope you enjoy. If I missed your favorite saint let me know, and I may add it to another bundle in the future.