About this 3D model

PRINT WITH 0 TOP LAYERS, 60/5mm BOTTOM LAYERS!!! Eyes up Raven, you've got a model to print. This is a personal favorite among the Hueforge art plates I'm posting here, however it does require a very specific configuration to get it to print correctly. For some reason, printing with even 1 top layer causes the blue-gray to cover up a bunch of the mech's details. Additionally, the Tough Cream White is borderline mandatory to get the misty/foggy effect. Pearlescent whites may work as an appropriate substitute, however. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Dark Blue Transmission Distance: 0.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA Hatchbox True Pink Transmission Distance: 8.5 PLA PolyLite Yellow Transmission Distance: 11 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Tough Cream White Transmission Distance: 10 Swap Instructions: Start with Black At layer #9 (0.88mm) swap to Dark Blue At layer #12 (1.12mm) swap to Blue Gray At layer #16 (1.44mm) swap to True Pink At layer #19 (1.68mm) swap to Yellow At layer #22 (1.92mm) swap to Gray At layer #25 (2.16mm) swap to Cream White for the rest. Want more of my designs and commercial rights to sell prints? Support me on Patreon!