About this 3D model

Can it do the Kessel Run in 12 parsecs? Who knows?! This is a fairly simple print-in-place Hueforge Hybrid print-in-place piece that combines filament painting methods and traditional 3D printing methods in one singular print. It utilises 4 filament colours, 3 for the Hueforge print, and one for the Millennium Falcon. If you are using the one-click 3MF file on Makerworld, all appropriate settings have been applied to the print. If you are not using the one-click printing method, or are NOT using a Bambu printer, see the print instructions below: Print Instructions: Print the hueforge print (0mm - 2.08mm) at 100% infill. The Millennium Falcon portion of the print (2.08mm - 80mm) should be printed at 10% infill, with 3 wall loops, 3 top and bottom surfaces. I used a layer height of 0.16mm. You can achieve this by using a layer height modifier in your slicer to modify layers 2.08mm-80mm. You do not need any supports for this print. I used Burnt Titanium as the background for the print, but you can use any variation of a dark or black colour. I used Polymaker's Starlight Mercury for the Millennium Falcon, but you can use any gray or silver variant, or whatever you like! Filament Swaps: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm Filaments Used: - PLA Flashforge Burnt Titanium Transmission Distance: 2.5 - (You can use black!) - PLA META Sunlu Teal Transmission Distance: 5.4 - PLA Kingroon White Transmission Distance: 8 - PLA Polymaker Starlight Mercury (This is for the Millennium Falcon!) Swap Instructions: - Start with Burnt Titanium - At layer #7 (0.68mm) swap to Teal - At layer #11 (1mm) swap to White - At layer #23 (1.96) swap to Starlight Mercury (this is the Falcon!) The wonderful Millennium Falcon model was sourced from here by Gareth42 . If you haven't yet, you should definitely print the standalone model, because it it marvellous! Have fun, and let me know how you go with the print! ____________________________________ Commercial License to Sell Prints If you want to sell any physical models I have uploaded anywhere, an unrestricted commercial license is available on the $10AUD tier of my Patreon ! ____________________________________