About this 3D model

A mod of the RTX4090 founder's edition's Fan which is cheap but high quality you can buy.this will help you to apply it on chassis or a radiator This is a free open source mod for All Diyers,you can download the file and 3D print it. For users: You're expected to prepare these items listed below to finish assembling kafter k-705 glue or any other glue you want to apply on the assemble or m2 screw (2.5-3mm length)(recommend) m3 or m3.5 screw(length~20mm) for mount on chassis or radiator define of the FPC pins: face to the pin side,upward,THEY ARE +12V,+12V,PWM,GND,FG,GND. connect one pare of the +12v and GND and it is good to go have fun 中文 RTX4090风扇MOD适配模型 安装须知 卡夫特705硅橡胶（用于风扇和框架的固定） 或m2螺丝，长度2.5-3mm（推荐） m3螺丝，长度20mm左右，用于风扇与机箱的固定 FPC针脚定义：面对金手指，排线指向上方，依次是 +12V,+12V,PWM脉冲调速信号，接地，测速线，接地 欢迎下载