About this 3D model

Filament Out Side On Sensor box Microswitch version https://youtu.be/QyrHoiIPXOU It has a button to push the Microswitch level over when fist feeding the filament It is for use with Marlin :-FILAMENT_RUNOUT_SENSOR : Note ADVANCED_PAUSE_FEATURE is required in Configuration_adv.h to use M600 with FILAMENT_RUNOUT_SENSOR and for connetion of the microswith to the RAMPS 1.4 board NOTE : set Unload filament in Marlin etc. to zero, feeding filament backwards into this will cause issues. The file:-"Filament Out Side On sensor box bowden main.stl" has a part 10mm thread for fitting to a Bowden fitting in my case on a storeage box, this may need supports. There is a main without the 10mm Bowden option:-"Filament_Out_Side_On_sensor_box_main.stl" Both main parts have 2.5mm holes for screwing 3mm bolts into for mountng. The Lid will fit either main box. There is a Lid with a bit bigger edge so it is easier to grip and open the box for filament fitting, etc..:-"Filament_Out_Side_On_sensor_box_lid_with_grip_edge.stl"May need filing a bit YouTube Video 3D Printout and test. Testing Filament Run Out begins at : 23:26Filament Out Side On sensor boxhttps://youtu.be/oJTsy-2uKdE Thingiverse files:- https://www.thingiverse.com/thing:2573752