About this 3D model

This model was created as training materials explaining operation of Helicopter Power Train for Single Main Rotor.Major components are;① Turboshaft Engine with Radial Turbine[Object] https://www.myminifactory.com/object/3d-print-turboshaft-engine-with-radial-compressor-and-turbine-75203[Video] https://youtu.be/maxeQ6HPnNI ② Main Gear Box, Full Metal Bearing Type[Object] https://www.myminifactory.com/object/3d-print-main-gear-box-for-helicopter-full-metal-bearing-type-75354 ③ Main Rotor Head, Fully Articulated Type[Object] https://www.myminifactory.com/object/3d-print-main-rotor-head-for-helicopter-fully-articulated-type-75364 ④ MRH Control Sticks, Fully Articulated Type[Object] https://www.myminifactory.com/object/3d-print-mrh-control-sticks-for-helicopter-fully-articulated-type-75365[Video] https://youtu.be/SHZq7fj3HLI ⑤ Power Train Assembly -- This creation(1) Orientation of Major Components : See photo(2) Stand and Hardware for Power Train : See Photo(3) Wood Plate and securing screws will be selected by yourself.{Video] https://youtu.be/7dE-qsZbTN4 Download files includes;- files: STL Files (3 items) Purchase Parts Information;- Screws and Nuts for securing Sticks Plate : M2x10 (4ea) Total Net Print Time: Approx. 10HR- (Estimated as case of PLA, 0.4mm Nozzle, 0.2mm Layer Height, 40% infill and No raft and support) Note: When at actual print, each parameter may be adjusted by your experience. 3D printing settings Raft, Support, Layer Height, Infill: Depending on your experience. My models were printed by "idbox" using with 0.4 nozzle, 1.75 PLA.[Update2022.3.26]Parts for TGB Drive train (7 items) added. I do hope your success!!