About this 3D model

Sunset Notice: Stealth Press 1 (and Sunrise Notice: Stealth Press 1S ) As of November 26, 2024, this revision of Stealth Press 1 is considered a legacy version. We recommend downloading and building the Stealth Press 1S version instead. Stealth Press 1 revision will remain accessible for reference purposes, as it is linked in numerous locations and has multiple community mods. This ensures continued access to Stealth Press 1 files for those who need them. ----------------------------------------------------------------------------------------------------------------------------------------------------------- WHERE TO GET MECHANICAL PARTS OF THE BUILD? Option 1 — Order ready-to-build kits (supported vendors) Stealth Press KIT — DFH.fm Stealth Press KIT (US) — KBD3D.com Stealth Press KIT (EU) — Lecktor.com Stealth Press is now available as a comprehensive mechanical parts KIT, streamlining the process of sourcing the necessary components. In many cases, purchasing the KIT proves to be a quicker and more convenient option than sourcing the parts individually. Availability and selection may vary depending on your location and existing inventory. Each listed KIT source offers a unique selection of parts, all adhering strictly to the BOM and carefully chosen to guarantee the highest quality build. Option 2 — Self-source using BOM (bill of materials) Mechanical parts QTY M3x8 SHCS — Bolts (Source: INT ) 40 M5x25 SCHS — Bolts (Sources: INT ) 2 F695-2RS — Bearings (F = Flanged) (Source: INT ) 4 M3 — Threaded Inserts — M3x5x4 ( M3 x (OD) 5 x (L) 4 — VORON) (Source: INT ) 30 MGN12H — Linear Rail — 300mm — Black (Source: INT ) or SS (Source: INT ) 1 KEY-BAK — Super48 36" 13oz (Source: INT ) 1 Printed Parts The most current revision is R1.1 - check the change log below! Printed parts 16 Soldering iron-related parts Heat-set insert tips vary for the type of soldering iron used! Soldering iron ( Generic , TS100/101 or Pinecil ) 1 Soldering Adapter for heat-set inserts (Source: INT ) 1 ASSEMBLY MANUAL Download the full assembly manual with visuals and a step-by-step guide . VIDEO BUILD GUIDES Iconic FAB video build guide Live build by Nero3D the Canuck Creator Live build by ModBotArmy SUPPORTED SOLDERING IRONS Generic , TS100/101 or Pinecil . PRINT GUIDELINES Here are print guidelines for you to follow and have decent success with printing parts: 3D PRINTING PROCESS FDM (fused deposition modeling) INFILL TYPE Grid, Gyroid, Honeycomb, Triangle or Cubic MATERIAL ASA, ASA-CF, ABS, ABS+, ABS-CF INFILL PERCENTAGE 40% - 60% LAYER HEIGHT Recommended: 0.2mm WALL COUNT Recommended: 4 SOLID TOP/BOTTOM LAYERS Recommended: 5 EXTRUSION WIDTH Forced 0.4mm Side notes to the print guidelines: You can succeed with Support cubic infill type (slicer support may vary) and as little as 25% infill for all parts if are aiming for faster print speeds and less filament usage. PLA, PLA+, and PETG are also considerable filament choices. However, take into account that soldering iron radiates some indirect heat. The usage of less temperature-stable filaments may result in part deformations over time. It is recommended to use ASA or ABS at least for “arm” and “iron mount” parts. A wall count of 4 is an absolute must to ensure the structural integrity of the parts. There is no need to go over the top with this. 4 are for this particular build. File naming for printed parts: The parts use this naming convention: PRIMARY COLOR — These files will have nothing at the start of the filename. Example: buildplate_x1.stl ACCENT COLOR — Files have “[a]” to the front of any STL file that is intended to be printed with accent color. Example: [a] _bushing_x1.stl COUNT OF PARTS — Files have “x1” to “x4” at the end of any STL file. The number represents the count of identical parts to be printed. Example: [a] _m5_1mm_spacer_x4 (In this case you will need to print 4 identical spacers). CREDITS AND ACKNOWLEDGEMENTS Special thanks to Stefan and Alexander from CNCKitchen for backing this project by providing a generous set of soldering-iron tips and heat-set inserts for building and testing purposes. Here is the list of other open-source projects used for sourcing multiple CAD parts . Models are used as-is or modified to fit the project purpose and design: VORON TAP: https://github.com/VoronDesign/Voron-Tap [CAD models for heat-set inserts and bolts] VORON Switchwire: https://github.com/VoronDesign/Voron-Switchwire [Base for remix of KEY-BAK mounting parts] Ender SW: https://github.com/boubounokefalos/Ender_SW [Base for remix of Support arms] CHANGELOG Date Change 14.11.2023 STLs for variations of generic soldering iron mounts were added supporting 18mm and 19mm (OD) irons. 12.11.2023 Minor update preparing for Dremel Add-On release. leg_x1_r1.1.stl is updated to leg_x1_r1.1_1 .stl removing safety buffers. This was necessary to ensure cross-compatibility in between base parts and multiple add-ons in development. 04.11.2023 Printed files updated to R1.1. with cosmetic cha