About this 3D model

About this Upload I´ve done this upload to combine the most usefull things arround the Stealth Press Project from Iconic FAB . Things i´ve included in this Package are the following Mods: Stealth Press Drawer Mod from 3DP-MAMSIH@3DPMAMSIH Stealth Press Keybak Replacemet Doorpuller from thomasfjen@thomasfjen_222021 Stealth Press Handle from radicalreel@radicalreel The Main-Build Process is covered by the Video from Iconic Fab: Mechanical parts QTY M3x8 SHCS — Bolts (Source: INT ) 40 M5x25 SCHS — Bolts (Sources: INT ) 2 F695-2RS — Bearings (F = Flanged) (Source: INT ) 4 M3 — Threaded Inserts — M3x5x4 ( M3 x (OD) 5 x (L) 4 — VORON) (Source: INT ) 30 MGN12H — Linear Rail — 300mm — Black (Source: INT ) or SS (Source: INT ) 1 KEY-BAK — Super48 36" 13oz (Source: INT ) 1 Printed Parts The most current revision is R1.1 - check the change log below! Printed parts 16 Soldering iron-related parts Heat-set insert tips vary for the type of soldering iron used! Soldering iron ( Generic , TS100/101 or Pinecil ) 1 Soldering Adapter for heat-set inserts (Source: INT ) 1 ASSEMBLY MANUAL Download the full assembly manual with visuals and a step-by-step guide . BOM for the Drawer MOD + the original design 4x magnets of 3X6mm for the Drawer 3x M3 Heat inserts (2x for the Extension base , 1x for the Handle ) 2x M3x10mm screws ( 2x for the Extension base ) 1x M3x25mm ( for the Handle ) Print setting like the original one no change no support needed Parts Needed for this ( not included the original parts for complete the Build ) Main_Core_Part Build-plate-main Build-Plate_extension Handle Drawer_front_x1 Drawer_Base_x1 Optional Parts, printed them by myself and they will work also! Main_core_Light_version front_drawer_light_v The Handle-Mod on Top is an easy swap out of the original printfiles, so no more Informations are needed. I hope you like the Idea behind this Collection. The Credits goes to the marked Designers above! Thanks for sharing your awesome work!