About this 3D model

This is meant to help those with arthritis easily use their fisihing reels. Products on the market currently cost around $75 and up (market example here) while this cost $0.74 in plastic and the 20cm of velcro required cost about $1.00 (click here for velcro) for an overall price of approximately $1.74. The model was made using OpenSCAD and the slicing software used was Cura. Main print settings: Material: PLA Layer Height: 0.2 mm Bottom/top Layer: 0.8 mm Walls: 0.8 mm Extruder Temperature: 200 Degrees C Infill: 35% Speed: 70 mm/s Total Print Time: 125 minutes