About this 3D model

Optimized for 3D printing with a amazing depth of field. The Glowing series is optimized with 2 filaments for the most popping effect when matched with glow in the dark filament. It can be printed with either glow in the dark filament or with plain bambu lab green filament (without the glow in the dark effect).. There are 2 print profiles available. 200x200 is optimized for x1c, p1s, p1p 150x150 is optimized for A1 mini. Check out my frame options in the links below https://makerworld.com/en/models/49964#profileId-51734 https://makerworld.com/en/models/40145#profileId-39785 Pictures can be printed with out AMS by following the print instructions below. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 2.7 PLA BambuLab Basic BambuLab Green Transmission Distance: 17 Swap Instructions: Start with Charcoal At layer #14 (1.2mm) swap to BambuLab Green for the rest. Boost Me Feel free to contact me if you want other designs or changes on the model. Please feel free to leave comments and ratings with feedback. I would love to see your makes and how you use the model. Please like and follow for more models! Art generated with midjourney and optimized for 3D printing with Hueforge.