About this 3D model

Christmas Angel picture from HueForge. If you change the order to Black, Gold, or Gray (depending on what you want for a touch), White, and finally a glowing luminescent filament. Gray and Gold version Description: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Filament Black Transmission Distance: 0.3 Filament Grey Transmission Distance: 20 Filament Gold Transmission Distance: 12 Filament White Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey At layer #12 (1.04mm) swap to Gold At layer #18 (1.52mm) swap to White for the rest. Glowing version Description: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: Filament Black Transmission Distance: 0.3 Filament Grey or Gold Transmission Distance: 20 Filament White Transmission Distance: 12 Glowing Filament Transmission Distance: 6 !!!! It appears you have mixed filament types. Be certain this is what you want. !!!!! Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Grey or Gold (Depends on your preferences) At layer #12 (1.04mm) swap to White At layer #18 (1.52mm) swap to Glow for the rest. A pokud si model nechcete tisknout, můžete si ho rovnou zakoupit zde: https://3dstisk.cz/produkt/3d-vytisk-andel/