About this 3D model

Hello, and thank you for checkin out my design. I designed this body to hold a camera in the third person view and rotate the view with a headtracker and a 9g servo. It should fit (K969 K979 K989 K999 P929 P939) models as long as the rims and tires will not bind on the body. NOTE: I had extended my rear axleto the back mounting points, extending the wheelbase by 3 or 5 mm. This mod must be done to ensure the wheels will fit properly. There is a file that ends in "moused" which has some circles to help with bed adhesion for ABS, which is what I used when I printed it. Mine was a p929. I replaced the stock wheels and tires with drift ones and extended the wheelbase with the extra part that was included in my kit (thanks WLtoys!). There is a clip-in spot on the right for an Eachine ATX-03. There is a snug spot at the front for a small battery for the vtx and camera. The clip-in camera mount is for a Runcam Nano. Parts list: WLToys 1/28 RC car with drift wheels/tiresStandard towerpro style 9g servoEachine ATX03RunCam NanoSmall 1s battery for video system***The lights (optional) are all 3mm LEDs, 6 in the rear and 4 in the front. I control mine with an arduino pro micro.Thanks for looking! Added files for driver side vtx configuration. This should keep the vtx away from the heat of the motor.