About this 3D model

This is an addon modification for Ehdrien’s Gecko foam blaster. You need to purchase or assemble your own Gecko in order to make this Mag Release work. Ehdrien's Gecko: Link Extra Hardware you need: A spring in 5mm diameter, 18mm length, or similar A M3 nut A M3 35mm bolt All details please see included pdf manual LICENSED SELLER This mod is under CC-BY-NC-SA license. A commercial version of the mod is licensed exclusively to Rainbow Mods & Props, you can get it physically from Rainbow's shop. Visit his shop at: https://rainbowmods.com/ There is no functional difference between two versions. The Rainbow's version is only more polished and optimized. 22 March 2021 UPDATE An extra lever version that using the original Gecko hardware: (only hardware difference) 1x M3 30mm bolt 1x M3 5.7mm heat threaded insert Ambi version, hardware: 1x M3 5.7mm heat threaded insert 1x M3 30mm/35mm bolt (depending on which lever version you print) Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: Sport & Outdoors