About this 3D model

This is a remix of a remix of Hero Me Gen 5. It's for the micro swiss direct drive kit for Ender 5/pro/plus. You have to dismantle the original fan housing and place this base instead and fix it with 4x M3 screws. Two on the left side over the bl-bracket. Two on the right side in the unused holes of the backplate. You can use the original bracket of your BL-touch, but turn the sensor in it so the plug is on the outside to make more space for the duct. You don't have to dismatle the hotend. For connecting the three parts togehter i used the threaded inserts from anazon. The ducts are the lightweight version with a little more space inside so my winsinn 4010 fans will fit. threaded inserts: https://www.amazon.de/dp/B08R5DKYVV/ref=cmswemrmtdpP5BZT5QCKNVVFDKYDXVE?_encoding=UTF8&psc=1 winsinn radial fan 24V, 4010 https://www.amazon.de/dp/B07RNPJ1YS/ref=cmswemrmtdp25134CVQ8MKEWHSKBJ30 Please use petg oder ABS.