About this 3D model

"Groot 3D Model" ? Bring the heartwarming charm of the Guardians of the Galaxy into your living space with this stunning Groot 3D model! Inspired by the beloved character, this intricately designed piece will add a touch of intergalactic wonder to your decor. Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing: • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well Materials and tools used to assemble parts: • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!