About this 3D model

Update Check out the improved V2 here: https://makerworld.com/en/models/2497237-3-pip-die-dice-v2-die-with-pips-1-2-and-3#profileId-2744815 I created a 3-PIP dice for my cousin that only has pips from 1 to 3 Since I couldn't find a 3D model online, I designed the dice with the holes for the pips in FreeCAD and filled it with additional objects in Bambu Studio It might be complicated, but I couldn't find a better solution for myself The dice and the pips can be freely colored in Bambu Studio and printed in one piece If this is not possible, you can print the dice with separate pips and press them in or glue them afterward I placed both versions on a build plate and printed them, see image 5 When printing in one piece, the side pips are unfortunately not perfectly round See image 6 It might be due to incorrect settings on my part The separate pips could be pressed into the holes quite well and look a bit better visually See image 7 Both prints compared: Image 8 and 9 (left 2-color print / right pips printed separately) Perhaps others can also use it, so I am putting it online here