About this 3D model

16mm skid dice for Gaslands and Gaslands Refueled. Print Settings Printer Brand: Anycubic Printer: Photon Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.05 Infill: 100% Filament: Resin Resin Grey Notes: I printed mine with Anycubic Grey resin with stock Photon Workshop print settings. Tried a few orientations and the best that worked for me was parallel to the build plate with a boat load of supports on just one side. Post-Printing============= Finished dice! What I did After removing the supports I sanded the surface as smooth as I was able, then primed in black. I then carefully applied a few coats of screaming skull to the faces of the dice, 3 sides at a time until I achieved full coverage. Haven't varnished yet but that'll be the next step, and so far I think they look great! How I Designed This=================== Downloaded the free skid dice template from the Gaslands website and brought into Affinity Photo where I blocked in the designs (by default they have a splattered paint effect which isn't ideal) before converting to SVG and applying to a simple filleted 16mm cube in Fusion 360. Please note the designs are not perfectly centered as Fusion 360 apparently lacks this ability? But in any case I tried my best to center them and I don't think any misalignment is noticeable at all. Category: Dice