About this 3D model

This tray system is modular, just print the parts you need and connect them to one storage place. Included: pen holder smarphone holder bowls USB/SD card holder a LED lit crystal for some atmosphere How to print: All models can be printed without support except the LED Crystal module, print that turned to its head for less support material try to print 2 smaller modules first to check for tolerances, on my printer it worked great, if you have problems contact me so i can change them How to build the LED Crystal Module: What you need: 3 pixels of WS2811 (5V) LED chain A NODE MCU or some other ESP8266 controller 6 M3 x 10mm screws some solder and a solder iron a power socket for example: (Amazon Link: https://tinyurl.com/2mhc7b7a) How to build: screw the LED onto the base glue the 3 LED pixel in place solder the ground of the power socket to the ground of the LED and the ESP, do the same with 5V care that you can still connnect it through its hole and that you can tighten up the nut in the back try if everything works screw the lid onto the ground of the module How to flash your ESP: go to https://kno.wled.ge/basics/getting-started/ follow the instructions to flash the ESP if you have problems and need help, contact me :) Have fun with this project! If you need help at any point feel free to contact me!