About this 3D model

In this mod for the X1C by Jorge Rui, https://makerworld.com/en/models/64650#profileId-67854 , He had a light that I could not find in the American Amazon store site so I decided to use some quick modeling and some LEDs I had. They are 24v LEDs that I have wired up and with an extra AMS cable I had I connected it to the AMS using on top of my X1C printer. Which you can get here : https://www.amazon.com/dp/B08M9J3P9D?ref=ppx_yo2ov_dt_b_product_details&th=1 I also included a new bracket used to connect the LED light casing to the original way he designed it to be made. When pushing the top and bottom together to complete the light, it will be a nice snug fit and has little clips that connect into from the top to the bottom. If you are using an AMS cable to connect the 24v LEDs then use the YELLOW (Positive) and RED (Negative) wires. If wired wrongly it could leave to the port frying or the AMS board inside not working. SO PLEASE PAY ATTENTION WHEN DO THIS!