About this 3D model

“Woman” - Fan Art inspired by Frank Miller`s legendary Comic “300” Framed Multi-Color Filament Painting Profile as seen in Picture 1-3: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Tough Cream White Transmission Distance: 10 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Silver At layer #20 (1.68mm) swap to Cream White At layer #33 (2.72mm) swap to Ivory White for the rest. FOR STLs ONLY: For STL “Purple_5Color_200…” Picture 4-6: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Matte Lilac Purple Transmission Distance: 2 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4 PLA Default White Transmission Distance: 5 Swap Instructions: Start with Charcoal At layer #6 (0.56mm) swap to Dark Blue At layer #23 (1.92mm) swap to Lilac Purple At layer #29 (2.4mm) swap to Lemon Yellow At layer #33 (2.72mm) swap to White for the rest. Print Time: 12h approx. For STL “Beige_4color_220…” (Pictures 7-9): Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 10 PLA BambuLab Matte Ivory White Transmission Distance: 4 Swap Instructions: Start with Charcoal At layer #8 (0.72mm) swap to Dark Blue At layer #22 (1.84mm) swap to Orange At layer #32 (2.64mm) swap to Ivory White for the rest. Print Time: 10,5h approx.