About this 3D model

Step 1 : go to https://observablehq.com/@johnboiles/wifi-qr-code-svg-generator Step 2 : Type in your Wi-Fi Information’s. Step 3 : Set the measurement for your QR-Code, we recommend a 50 mm x 50 mm QR-Code. Set the other Measurements like in the following picture (50 mm for the Size, 0 mm Insert from the cutout path and the QR-Code and 0 mm for the corner radius. Step 4 : Ensure you have 7% error correction for your QR-Code to minimize the number of pixels. Step 5 : Then download the SVG file of your QR-Code and go to: https://makerworld.com/fr/makerlab/makeMySign Step 6 : Create a sign which is 50 mm to be able to use the stand. Step 7 : import your QR-Code using the import SVG button. Then place it where you want it to be on the sign (Do not resize the QR-Code, otherwise it could be not printable any more) Move the QR-Code where you want: Step 8 : Download your model and open it in your slicer ( prefer .3mf file ) Step 9 : ( Warning it is crucial ) go to your setting for each object [1] , in your settings for your sign object delete the first SVG file that has another colour but the same GroupNumber (from the SVG of your QR-Code) (SVG-GroupNumber-EntityNumber) [2] Step 10 : Slice your part make sure the QR-Code has another than the background (you will need contrast to be able to read the QR-Code), print it . →Additionally, if you want a very nice holder to display your QR-Code (other than my minimalistic one), make sure to check Table Card Holder( by Wing-ART) !