About this 3D model

SummaryThis is a customizable snap-fit pill box, perfect for organizing daily medication. I designed it to be printable in Glow-in-the-Dark PLA so it's easy to find in the dark! This project includes 4 main versions of the lid, each featuring a different number of notches. This allows you to choose your preferred opening/closing "click" force. To ensure a perfect fit on any 3D printer, each version is provided in 3 different tolerance files (0.1mm, 0.2mm, and 0.3mm). In total, you are downloading 12 STL files to find the perfect one for your setup. Version Details (Notches)Choose the fit you prefer: V1 (16 Notches): Provides a very secure, tight fit. (Hard to open, good for travel).V2 (8 Notches): A standard, secure "click" fit. (Recommended).V3 (4 Notches): A lighter fit. Easy to open and close.V4 (No Notches): A simple, smooth friction-fit version with no clicking mechanism. Tolerance Details (How to Choose)This refers to the gap between the lid and the box. 0.1mm Tolerance: For highly calibrated printers. This provides a very precise, tight fit. (Confirmed working on my printer with PLA).0.2mm Tolerance: The standard tolerance. If you are unsure, I recommend you print this file first as a test.0.3mm Tolerance: For printers that tend to over-extrude or if you want a guaranteed looser fit.Example: The file V2_8-Notch_0.2mm.stl is Version 2 (8 notches) with the standard 0.2mm tolerance. Print SettingsThese are the settings I used for a successful print. Filament: PLA (Prints beautifully with Glow-in-the-Dark PLA!)Layer Height: 0.2mmInfill: 15%Walls: 3Rafts: NoSupports: No (Designed to print without supports)Please post your makes! I would love to see which version and tolerance worked best for you, especially with different filaments. Happy printing! If you've enjoyed my work and would like to buy me a coffee to support my creative efforts, you can do so through the link below. Your generosity is greatly appreciated!Buy Me a Coffee: https://www.buymeacoffee.com/ahmetutkuozkan