About this 3D model

My brand new Pokeball design inspired by the work done by NeoTendar and his beloved Pokemon Unlimited Project https://www.deviantart.com/neotendar/gallery , with his permission to try and recreate! The Pokeball in this Thing file is a more classic version with some twists, a more closer inspired version of NeoTendar's Pokeballs with the glowing slits in it is still in the works, having a hard time replicating those slits in Fusion, he told me he used Maya. The pokeball can be Fully printed, or, if you chose, you can use a metal RGB button which can be wired up to glow, the files are already ready to take the adafruit 19mm Rugged Metal On/Off switch https://www.adafruit.com/product/3426 . I don't know how to make them glow yet, but I am learning, I intend to properly wire it up with the glowing slits in the next version of the pokeball. There are 2 bottom half files, one to help support the metal button if you so chose, or one without.To complete the hinge, you should be able to fit a piece of filament into the hinge system.Both the top and bottom shell are the same, so you only need to dupe the shell file.For magnets to keep it closed, I used magnets which are around W=4.5mm, L=9.5mm, H=1.5mm, so if you find any in that zone, all good! I am yet to print it since I just finished modeling it, but I'm excited to see how it goes! If you have any suggestions please let me know!